Care & Maintenance Tips To Extend Cement Particle Board Life
Home » Care & Maintenance Tips To Extend Cement Particle Board Life
Cement particle boards are the most commonly used construction materials because of their strength, durability, resistance to fire and moisture, and termite. Among the most favoured brands of such materials are those that can provide a long-lasting and safe material for different usages ranging from wall partitions and flooring to ceiling and furniture. With maintenance and proper care, we derive maximum durability out of cement particle boards.
In this guide, we’ll explore the best practices to enhance the durability of Bison Panels, ensuring they remain in excellent condition for years to come.
1. Proper Installation for Long-Lasting Performance
The lifespan of cement particle boards begins with correct installation. If the panels are not installed properly, they may develop cracks, warp, or lose their strength over time. Here are some key points to follow during installation:
- Use Proper Tools: Sawn blades with carbide tips must be utilized to cut cement particle boards so that sharp edges are avoided.
- Supply Expansion Gaps: There must be 2-3 mm space between the panels for thermal expansion and crack prevention.
- Correct Fastening: Straight driving must be used while using corrosion-resistant fasteners or nails for board weakening prevention.
- Prime for Exterior Use: Where the boards are to be exposed on the exterior, applying a sealer coat or primer can add an extra layer of protection against moisture.
These installation tips will increase the lifespan of cement particle boards long and avoid future problems.
2. Moisture & Water Damage Protection
Bison Panel is not resistant to moisture, but prolonged exposure to water may affect its duration. To ensure that the board lasts as long as possible, take these tips on protecting the board from moisture:
- Seal the Edges: Seal all exposed edges with a waterproof sealer or paint to prevent water absorption.
- Raise from Ground Contact: Avoid contact with soil or standing water by elevating it on a support frame.
- Regular Inspection: Inspect for water damage, particularly in bathrooms, kitchens, and exterior walls, regularly.
- Use Waterproof Coatings: In humid weather conditions, re-coating boards with waterproof coating will be ensured to give protection so that they will be strong
These are simple yet efficient habits that will increase the life of cement particle boards so that, although they come in contact with water-prone environments, they will be strong.
3. Prevent Termite & Pest Infestation
The advantage of the Bison Panel is that it is termite-proof. But to further protect the boards from pests:
- Keep the Environment Clean: Do not store untreated wood or wood pieces close to the panels.
- Apply Anti-Termite Treatment: Providing a second coat of protective treatment in termite-infested areas is of great help.
- Seal Cracks and Gaps: Seal all cracks and gaps to keep the pests out.
If you use the correct pest control, you can extend the lifespan of cement particle boards by a few years and their strength.
4. Regular Cleaning & Maintenance
Cleaning is vital to avoid dust accumulation and wear on surfaces. Here is the way you keep your Bison Panels at their best:
- Dry or Wet Cloth: Do not use too much water for cleaning because too much moisture will weaken the surface.
- Mild Soap Solution: You require a mild soap-in solution with water to ensure the board thoroughly afterwards.
- Avoid Harsh Chemicals: Harsh or acidic cleaners can strip off the protective coating of the board.
- Inspect for Damage: Scouring regularly for surface damage or cracks and repairing them immediately will stop further weakening.
A regular cleaning schedule of periodic maintenance can increase the life of cement particle boards, and they will be in new condition.
5. Guard against Harsh Weather Conditions
While Bison Panels are weather-resistant, additional protection will prolong their life:
- UV Protection for Outdoor Use: Direct sunlight exposure can be avoided with the use of UV-resistant paint or laminate, which won’t discolour and weaken the surface.
- Temperature Control: Irregular temperature variations will disrupt the operation and a stable indoor environment.
- Wind & Impact Protection: Fix the boards by binding them in windy conditions so that they do not get damaged.
Accurate weatherproofing will ensure cement particle boards are long-lasting, as they will not be damaged even under harsh conditions.
Conclusion
The lifespan of cement particle boards largely depends on the quality of maintenance and care they receive. With proper installation procedures, moisture protection, cleaning, and repair, you can prolong the lifespan of your Bison Panels and keep them intact.
No matter where you apply them, on ceilings, walls, floors, or furniture, being proactive will keep them in their prime condition for decades. Bison Panel is a quality, reliable product and with upkeep, you can maximise its performance and longevity.
For building owners, interior designers, and contractors seeking a durable, all-around building material, maintenance investment will have your cement particle boards’ functioning capacity.